HOW TO REMOVE WATER FROM THE CHARGING PORT
Contents
Have you ever dropped your phone in the water or accidentally spilled water on it? It happens to a lot of people. Water-resistant electronics are more popular than ever, yet they are still susceptible to water damage. Any gadget can malfunction, especially if the charging connector is damp. Even if you have no idea how water got into your charging port, most smartphones will notify you of the presence of liquid. Fortunately, there are some simple methods for fast drying your phone or tablet. So, let’s get right to it and figure out how to remove water from the charging port on all devices.
What Not To Do While Removing Water From A Charging Port
There are a few pieces of common knowledge about drying out water that you should never follow.
To begin, do not enter any foreign objects, such as a cotton swab or paper towel, into the charging port. Not only will this drive the moisture further into your gadget, but you may wind up damaging or shifting the inside components if you’re not cautious. Even when dried, it will not operate at that point.
Some instructions recommend using a hairdryer to blast the gadget with hot, circulating air. However, this might cause your smartphone to overheat and potentially distort the metal within the charging port.
And, regardless of how many websites advise it, don’t leave your phone in a bowl of dry rice. This does not dry it out any faster than circulating air, and minute pieces of rice or starch can become lodged in the charging port and harm it.
Simply be patient and allow your gadget to dry. You’ll be relieved when the water is gone and everything is back to normal.
How To Remove Water From The Charging Port By Some Easy Methods
Many of the ways for removing water from a charging port that is floating around the internet have the potential to hurt the device much more.
Only legitimate and safe ways for removing water from your charging port will be discussed here. Major cellphone firms such as Apple and Samsung support these approaches.
Allow it to dry naturally or with a fan.
The simplest way to dry a charging port is to let it alone to dry. This may appear very basic, yet it always works.
Keep the phone in a well-ventilated area, preferably one with a fan to circulate the air. Leave the charging port open and, if possible, position the charging port down to speed up the drying process.
After 30 minutes of drying, check the port on your device. Continue to wait if you can still see moisture inside or if the device displays a “liquid detected” error.
If your device is small enough to be held in one hand, the charging port should be directed down and lightly touched. This procedure can be used to flush away excess water.
Utilize a Cotton Cloth
You must first eliminate any wetness or moisture. You may speed up the drying process by using a little piece of soft cotton cloth. To clean the charging port, slowly rub the cloth inwards.
After that, you may let your phone dry on its own for up to 30 minutes. Applying too much pressure to the charging connector will create more damage than it can cure. This can also allow water to enter the charging port much deeper.
Hair Dryer/Vacuum Cleaner Use
To use the hairdryer approach, switch on the “Cool” setting and blast at a slower pace toward the slightly inclined phone. Heat can harm your phone’s components, so avoid using a dryer unless it has a “cool” setting.
On the other hand, utilizing a suction hose to remove water from your phone’s charging port may be useful. To accomplish this, just connect a hose to your vacuum cleaner and you’re ready to go.
Connect the vacuum cleaner hose to your phone’s charging connector, then turn it on and wait for it begins sucking. The suction will surely aid in the removal of water from your iPhone’s charging port. Again, you must exercise caution with the vacuum cleaner’s suction force so that it does not interfere with other phone components.
Please contact the Service Center.
If none of the above-listed remedies worked and you feel the charging port is faulty, contact customer service. For Samsung customers, the sole alternatives are the Support website or a walk-in service facility. If you have an iPhone, go to the nearest Apple Support Center as soon as possible.
You can take your damp phone to the nearest repair shop. They have expert equipment that can assist in drying the phone’s charging port.
Conclusion
Surprisingly, many individuals have this faith when they buy the latest iPhones since everyone believes they are waterproof. To be honest, the fact that these phones have IP ratings often raises one’s confidence and carelessness while handling their phones in or near water. The fact is that whether or not your iPhone has an official IP rating, submerging your iPhone in water is not recommended since Apple’s warranty does not cover water damage, even if your iPhone has an official IP certification.
Motherofcoupons provides you with some tips on how to remove water from the charging port. If you like it, enjoy and follow us for more hacks and techniques about mobile devices. Thank you for reading!
